Kaadị nnata Novastar A5S Plus LED Ngosipụta HUB320 HUB210 HUB75E HUB Board HUB nkwụnye efere maka Nova AxS Series nnata.

Nkọwa dị mkpirikpi:


Nkọwa ngwaahịa

Mkpado ngwaahịa

HUB75E

HUB75E (4)
HUB75E (5)
HUB75E (6)

HUB210

HUB210 (3)
HUB210 (4)
HUB210 (5)
HUB210 (6)

HUB320

HUB320 (3)
HUB320 (4)
HUB320 (5)
HUB320 (6)

A5s PLUS Okwu Mmalite

A5s Plus bụ kaadị nnabata izugbe nke Xi'an NovaStar Tech Co., Ltd. mepụtara (nke a na-akpọkwa NovaStar).Maka IC ọkwọ ụgbọ ala PWM, otu A5s Plus na-akwado mkpebi ruru 512 × 384@60Hz.Maka IC ọkwọ ụgbọ ala nkịtị,otu A5s Plus na-akwado mkpebi ruru 384×384@60Hz.Na-akwado njikwa agba, 18bit+, ọkwa pikselụihie na chroma calibration, mgbazi ngwa ngwa, obere latency, 3D, mgbanwe gamma nke ọ bụla maka RGB, ntụgharị onyonyo na 90° agbakwunyere, yana ọrụ ndị ọzọ, A5s Plus nwere ike melite mmetụta ngosipụta na ahụmịhe onye ọrụ.

 A5s Plus na-eji njikọta njupụta dị elu maka nzikọrịta ozi iji gbochie mmetụta nke uzuzu na ịma jijiji, na-ebute nkwụsi ike dị elu.Ọ na-akwado ruo otu 32 nke data RGB yiri ya ma ọ bụ otu 64 nke data serial (gbasaa na otu 128 nke data serial).Ntụtụ echekwara ya na-enye ohere maka ọrụ omenala nke ndị ọrụ.N'ihi nhazi ngwaike nke EMC Class B ya, A5s Plus emelitere ndakọrịta elektrọn ma dabara maka nhazi saịtị dị iche iche.

Atụmatụ A5s PLUS

Mmelite iji gosipụta mmetụta

njikwa agba

Na-akwado gamuts agba ọkọlọtọ (Rec.709, DCI-P3 na Rec.2020) na agba agba agba agba, na-eme ka agba ndị ziri ezi na ihuenyo.

⬤18bit+

Meziwanye ihe ngosi LED isi awọ site ugboro anọ ka ịzenarị mfu isi awọ n'ihi obere nchapụta ma nye ohere maka onyonyo dị nro.

⬤Pixel larịị nchapụta na chroma calibration

Na-arụ ọrụ na sistemu mmezi dị elu nke NovaStar iji mezie nchapụta na chroma nke pikselụ ọ bụla, wepụ ihe dị iche iche nchapụta na ndịiche chroma nke ọma, ma na-eme ka nchapụta dị elu na nkwụsi ike chroma.

⬤Ngbanwe ngwa ngwa nke ahịrị gbara ọchịchịrị ma ọ bụ na-egbuke egbuke

Enwere ike idozi ahịrị gbara ọchịchịrị ma ọ bụ na-egbuke egbuke nke mere site na nbipu nke kabinet ma ọ bụ modul iji meziwanye ahụmịhe anya.Ọrụ a dị mfe iji na nhazi ahụ na-arụ ọrụ ozugbo.

Na NovaLCT V5.2.0 ma ọ bụ karịa, enwere ike ịme mgbanwe ahụ na-ejighi ma ọ bụ gbanwee isi iyi vidiyo.

⬤Adị obere latency

Maka IC ọkwọ ụgbọ ala PWM, enwere ike ibelata nkwụsị nke isi iyi vidiyo na njedebe kaadị nnata ka ọ bụrụ 1 etiti.Maka DCLK na-aga n'ihu PWM ọkwọ ụgbọ ala IC, iji jiri obere latency, ngwa ngwa ahaziri ahazi achọrọ.

⬤3D

Na-arụ ọrụ na njikwa na-akwado ọrụ 3D, kaadị nnata na-akwado mmepụta ihe oyiyi 3D.

Ndozi gamma nke onwe maka RGB

Na-arụ ọrụ na NovaLCT (V5.2.0 ma ọ bụ mgbe e mesịrị) na onye njikwa na-akwado ọrụ a, kaadị na-anata na-akwado nhazi nke gamma na-acha uhie uhie, gamma green na blue gamma, nke nwere ike ịchịkwa ihe oyiyi na-adịghị mma na ọnọdụ isi awọ dị ala na nkwụsịtụ ọcha. , na-enye ohere maka ihe oyiyi dị adị karị.

⬤90° ntụgharị ntụgharị

Enwere ike ịtụgharị onyonyo ngosi n'ọtụtụ 90°(0°/90°/180°/270°).

Nkwalite na-ejigide

⬤Smart modul (ngwaọrụ raara onwe ya nye chọrọ)

Na-arụ ọrụ na smart modul, ndị na-anata kaadị na-akwado modul ID management, nchekwa nke calibration coefficients na modul parameters, nlekota nke modul okpomọkụ, voltaji na ewepụghị cable nkwurịta okwu ọnọdụ, LED njehie nchọpụta, na ndekọ nke modul na-agba ọsọ oge.

Ndozi modul akpaka

Mgbe etinyere modul ọhụrụ nwere ebe nchekwa ọkụ iji dochie nke ochie, ọnụọgụ calibration echekwara na ebe nchekwa flash nwere ike ibugo ya ozugbo na kaadị nnata mgbe agbanyere ya, na-eme ka nkwụsi ike dị elu maka ma nchapụta na chroma.

⬤ Na-ebugo ngwa ngwa nke ọnụọgụ nhazi

Enwere ike ibugo ọnụọgụ nhazi ngwa ngwa na kaadị nnata, na-eme ka arụmọrụ dị mma.

Njikwa Flash modul

Maka modul nwere ebe nchekwa flash, enwere ike ijikwa ozi echekwara na ebe nchekwa.Enwere ike ịchekwa ọnụọgụ calibration na modul ID ma gụọ ya azụ.

⬤Otu ọpịpị iji tinye ọnụọgụ ngbanwe na modul Flash

Maka modul nwere ebe nchekwa ọkụ, mgbe eriri Ethernet kwụsịrị, ndị ọrụ nwere ike ijide bọtịnụ nyocha nke onwe na kabinet iji bulite ọnụọgụ calibration na ebe nchekwa flash nke modul na kaadị nnata.

Ihe osise 1.0

The cabinets na-egosipụta nọmba kaadị nnata na ozi ọdụ ụgbọ mmiri Ethernet, na-enye ndị ọrụ ohere ịnweta ebe dị mfe na njikọ topology nke ịnata kaadị.

⬤Tụlite onyonyo echekwabara na kaadị nnata

Onyonyo egosiri n'oge mmalite, ma ọ bụ gosipụtara mgbe eriri Ethernet kwụsịrị ma ọ bụ enweghị mgbama vidiyo nwere ike ịhazi ya.

⬤ Okpomọkụ na voltaji nlekota oru

Enwere ike nyochaa ọnọdụ okpomọkụ na voltaji nke kaadị nnata na-ejighị ihe ndị ọzọ.

Ihe ngosi LCD nke Cabinet

Igwe LCD ejikọrọ na kabinet nwere ike igosipụta okpomọkụ, voltaji, otu oge na-agba ọsọ na ngụkọta oge ịgba ọsọ nke kaadị nnata.

⬤Nchọpụta njehie Bit

Enwere ike nyochaa ogo nkwurịta okwu ọdụ ụgbọ mmiri Ethernet nke kaadị nnata yana ọnụ ọgụgụ nke ngwugwu ezighi ezi nwere ike ịdekọ iji nyere aka dozie nsogbu nkwurịta okwu netwọk.

⬤Nchọpụta ọnọdụ nke akụrụngwa ike abụọ

Mgbe a na-eji ọkụ ọkụ abụọ eme ihe, enwere ike ịhụ ọkwa ọrụ ha site na kaadị nnata.

Ihe omume firmware na-agụghachi azụ

Enwere ike ịgụghachi mmemme firmware nke kaadị nnata ma chekwaa ya na kọmputa mpaghara.

⬤Agụghachi paramita nhazi

Enwere ike ịgụta usoro nhazi nke kaadị nnata ma chekwaa ya na kọmputa mpaghara.

Mmelite na ntụkwasị obi

⬤ Nkwado kaadị abụọ na nlekota ọkwa

N'ime ngwa nwere ihe achọrọ maka ntụkwasị obi dị elu, enwere ike itinye kaadị abụọ na-anata n'otu bọọdụ hub maka nkwado ndabere.Mgbe kaadị nnata nke mbụ dara, kaadị nchekwa ahụ nwere ike ịrụ ọrụ ozugbo iji hụ na ọrụ ngosi anaghị akwụsị akwụsị.

Enwere ike nyochaa ọkwa ọrụ nke kaadị nnata nke mbụ na nkwado ndabere na mpaghara NovaLCT V5.2.0 ma ọ bụ karịa.

⬤Ndabere akaghị aka

Kaadị nnata na onye njikwa na-etolite akaghị site na njikọ ahịrị izizi na ndabere.Mgbe mmejọ mere n'ebe ahịrị ahịrị, ihuenyo ka nwere ike igosipụta onyonyo nke ọma.

⬤ Ndabere abụọ nke paramita nhazi

A na-echekwa parampat nhazi kaadị nnabata na mpaghara ngwa na mpaghara ụlọ ọrụ nke kaadị nnata n'otu oge.Ndị ọrụ na-ejikarị nhazi nhazi na mpaghara ngwa.Ọ bụrụ na ọ dị mkpa, ndị ọrụ nwere ike weghachite paramita nhazi na mpaghara mmepụta ihe na mpaghara ngwa.

Nkwado mmemme abụọ

A na-echekwa nnomi abụọ nke mmemme firmware na kaadị nnata na ụlọ ọrụ mmepụta ihe iji zere nsogbu na kaadị nnata nwere ike ịrapagidesi ike n'oge na-emelite mmemme.

A5s PLUS Ọdịdị

1

Ihe ngosi A5s PLUS

Ihe ngosi Agba Ọnọdụ Nkọwa
Na-agba ọsọ

egosi

Akwụkwọ ndụ akwụkwọ ndụ Na-egbuke egbuke otu ugboro kwa 1s Kaadị nnata na-arụ ọrụ nke ọma.Njikọ eriri Ethernet bụ ihe nkịtị, yana ntinye isi iyi vidiyo dị.
Na-egbuke egbuke otu ugboro kwa 3s Njikọ eriri Ethernet adịghị mma.
Na-egbuke egbuke ugboro 3 kwa 0.5s Njikọ eriri Ethernet bụ ihe nkịtị, mana enweghị ntinye isi iyi vidiyo dị.
Na-egbuke egbuke otu ugboro kwa 0.2s Kaadị nnata ahụ etinyeghị mmemme n'ime

mpaghara ngwa ma ugbu a na-eji mmemme ndabere.

Na-egbuke egbuke ugboro 8 kwa 0.5s Mgbanwe mgbanwe mgbanwe mere na ọdụ ụgbọ mmiri Ethernet yana nkwado ndabere nke akaghị arụ ọrụ.
Ike

egosi

Uhie Na-adị mgbe niile Ntinye ike bụ ihe nkịtị.

Akụkụ A5s PLUS

The osisi ọkpụrụkpụ bụghị ihe karịrị 2.0 mm, na ngụkọta ọkpụrụkpụ (board ọkpụrụkpụ + ọkpụrụkpụ nke components na n'elu na ala n'akụkụ) abụghị ihe karịrị 8.7 mm.Agbanyere njikọ ala (GND) maka ịgbanye oghere.

2

Mara:

Oghere dị n'etiti elu elu nke A5s Plus na bọọdụ hub mgbe njikọ ha dị elu jikọtara ọnụ bụ 5.0 mm.A na-atụ aro ogidi ọla kọpa 5-mm.

Iji mepụta oghere ma ọ bụ trepan na-arị elu, biko kpọtụrụ NovaStar maka eserese nhazi ọkwa dị elu.

A5s PLUS PIN

32 Otu dị iche iche nke Yiri RGB Data

3
5
6
7
8

64 Otu dị iche iche nke Oghere Usoro Data

4
9
10
11
12

Mara:

Ntinye ike akwadoro bụ 5.0 V.

OE_RED, OE_GREEN na OE_BLUE bụ akara ngosi na-enyere aka.Mgbe anaghị achịkwa RGB iche, jiri OE_RED.Mgbe ejiri mgbawa PWM, a na-eji ha dị ka akara GCLK.

N'ime ụdị nke otu 128 nke data serial, Data65-Data128 na-atụgharị n'ime Data1-Data64.

Ntụaka Imepụta maka Extkwusiri Ọrụ

Ntụ maka arụrụ arụrụ arụ
Ntụtụ Ntụtụ Flash Modul akwadoro Akwadoro

Smart Module Pin

Nkọwa
RFU4 HUB_SPI_CLK Echekwara Mgbama elekere nke serial pin
RFU6 HUB_SPI_CS Echekwara CS mgbama nke serial pin
RFU8 HUB_SPI_MOSI / Ntinye nchekwa data Flash modul
/ HUB_UART_TX Smart modul TX mgbama
RFU10 HUB_SPI_MISO / Mbupute nchekwa data Flash modul
/ HUB_UART_RX Smart modul RX mgbama
RFU3 HUB_CODE0  

 

Module Flash BUS njikwa pin

RFU5 HUB_CODE1
RFU7 HUB_CODE2
RFU9 HUB_CODE3
RFU18 HUB_CODE4
RFU11 HUB_H164_CSD 74HC164 data mgbaama
RFU13 HUB_H164_CLK
RFU14 POWER_STA1 Mgbama nchọpụta ọkụ abụọ
RFU16 POWER_STA2
RFU15 MS_DATA Mgbama nkwado ndabere kaadị abụọ
RFU17 MS_ID mgbama ndabere kaadị abụọ

Mara:

RFU8 na RFU10 bụ ntụtụ ndọtị multiplex mgbaàmà.Naanị otu ntụtụ sitere na ma ọ bụ ntụtụ Smart Module akwadoro ma ọ bụ ntụtụ Flash Module akwadoro ka enwere ike ịhọrọ n'otu oge.

Nkọwapụta A5s PLUS

Mkpebi kachasị 512×384@60Hz (PWM ọkwọ ụgbọ ala ICs)

384×384@60Hz (ICs ọkwọ ụgbọ ala nkịtị)

Igwe ọkụ eletrik Ntinye voltaji DC 3.8 V ruo 5.5 V
Enyere ugbu a 0.6 A
Enyere ike oriri 3.0 W
Environment na-arụ ọrụ Okpomọkụ -20°C ruo +70°C
iru mmiri 10% RH ruo 90% RH, na-abụghị condensing
Ebe nchekwa Okpomọkụ -25°C ruo +125°C
iru mmiri 0% RH ruo 95% RH, na-abụghị condensing
Nkọwapụta anụ ahụ Akụkụ 70.0 mm × 45.0 mm × 8.3 mm
 

Nha ịbụ

16,2 g

Mara: Ọ bụ arọ nke otu kaadị nnata naanị.

Ozi mbukota Nkọwa nkwakọ ngwaahịa A na-akwakọba kaadị ọ bụla na-anata n'ime mkpọ ọnya.Igbe nke ọ bụla nwere kaadị nnata 80.
Akụkụ igbe nkwakọ ngwaahịa 392.0 mm × 200.0 mm × 123.0 mm

Ọnụ ego nke ugbu a na ike ike nwere ike ịdịgasị iche dabere n'ihe dị iche iche dịka ntọala ngwaahịa, ojiji, na gburugburu ebe obibi.


  • Nke gara aga:
  • Osote: