Kaadị nnata Novastar A5s Plus LED

Novastar A5s Plus LED Ngosipụta nnata kaadị egosipụtara

Nkọwa dị mkpirikpi:

A5s Plus bụ kaadị nnabata izugbe nke Xi'an NovaStar Tech Co., Ltd. mepụtara (nke a na-akpọkwa NovaStar).Otu A5s Plus na-akwado mkpebi ruru 512×384@60Hz (NovaLCT V5.3.1 ma ọ bụ emechaa chọrọ).

Na-akwado njikwa agba, 18bit+, nchapụta ọkwa pikselụ na nhazi chroma, mmezi gamma onye ọ bụla maka RGB, yana ọrụ 3D, A5s Plus nwere ike melite mmetụta ngosipụta na ahụmịhe onye ọrụ.

Ajuju UGBUA WhatsApp Email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Okwu mmalite

A5s Plus na-eji njikọta njupụta dị elu maka nzikọrịta ozi iji gbochie mmetụta nke uzuzu na ịma jijiji, na-ebute nkwụsi ike dị elu.Ọ na-akwado ruo otu 32 nke data RGB yiri ya ma ọ bụ otu 64 nke data serial (gbasaa na otu 128 nke data serial).Ntụtụ echekwara ya na-enye ohere maka ọrụ omenala nke ndị ọrụ.N'ihi nhazi ngwaike nke EMC Class B ya, A5s Plus emelitere ndakọrịta elektrọn ma dabara maka nhazi saịtị dị iche iche.

Asambodo

RoHS, EMC Klas B

Atụmatụ

Mmelite iji gosipụta mmetụta

njikwa agba

Hapụ ndị ọrụ ka ha gbanwee gamut agba nke ihuenyo n'efu n'etiti gamuts dị iche iche ozugbo iji mee ka agba ndị dị na ihuenyo ahụ pụta ìhè.

⬤18bit+

Meziwanye ihe ngosi LED isi awọ site ugboro anọ ka ịzenarị mfu isi awọ n'ihi obere nchapụta ma nye ohere maka onyonyo dị nro.

⬤Pixel larịị ihie na chroma calibration Na-arụ ọrụ na NovaStar's dị elu nkenke calibration usoro iji mezie nchapụta na chroma nke ọ bụla pixel, na-ewepụ nke ọma nchapụta ọdịiche na chroma iche, na-enyere elu nchapụta agbanwe agbanwe na chroma agbanwe agbanwe.

⬤Ngbanwe ngwa ngwa nke ahịrị gbara ọchịchịrị ma ọ bụ na-egbuke egbuke

Enwere ike idozi ahịrị gbara ọchịchịrị ma ọ bụ na-egbuke egbuke nke mere site na nbipu nke kabinet ma ọ bụ modul iji meziwanye ahụmịhe anya.Ọrụ a dị mfe iji na nhazi ahụ na-arụ ọrụ ozugbo.

Na NovaLCT V5.2.0 ma ọ bụ karịa, enwere ike ịme mgbanwe ahụ na-ejighi ma ọ bụ gbanwee isi iyi vidiyo.

Nkwalite na-ejigide

⬤Adị obere latency

Enwere ike belata nkwụsị nke isi iyi vidiyo na njedebe kaadị nnata na 1 etiti (naanị mgbe ị na-eji modul nwere IC ọkwọ ụgbọ ala nwere RAM arụnyere n'ime ya).

⬤3D ọrụ

Na-arụ ọrụ na kaadị izipu na-akwado ọrụ 3D, kaadị nnata na-akwado mmepụta ihe oyiyi 3D.

⬤ Ndozi gamma n'otu n'otu maka RGB

Na-arụ ọrụ na NovaLCT (V5.2.0 ma ọ bụ mgbe e mesịrị) na kaadị izipu nke na-akwado ọrụ a, kaadị na-anata na-akwado nhazi nke gamma na-acha uhie uhie, gamma green na blue gamma, nke nwere ike ịchịkwa ihe oyiyi na-enweghị otu na obere isi awọ na nguzozi ọcha. nkwụghachi, na-enye ohere maka ihe onyonyo dị adị karịa.

Ntụgharị onyonyo na 90° gbakwunyere

Enwere ike ịtọ onyonyo ngosi ka ọ tụgharịa n'ọtụtụ 90° (0°/90°/180°/270°).

⬤Smart modul (ngwaọrụ raara onwe ya nye chọrọ) Na-arụ ọrụ na smart module, kaadị nnata na-akwado njikwa ID modul, nchekwa nke ọnụọgụ calibration na paramita modul, nlekota nke ọnọdụ okpomọkụ modul, voltaji na ọkwa nkwurịta okwu USB, nchọpụta njehie LED, na ndekọ nke modul na-agba ọsọ oge.

Ndozi modul akpaka

Mgbe etinyere modul ọhụrụ nwere ebe nchekwa flash iji dochie nke ochie, ọnụọgụ calibration echekwara na ebe nchekwa flash nwere ike ibugo ya na kaadị nnata na-akpaghị aka mgbe agbanyere ya.

⬤Nbulite ngwa ngwa nke ọnụọgụ calibration Enwere ike ibugo ọnụọgụ nhazi ngwa ngwa na kaadị nnata, na-eme ka arụmọrụ dị mma.

Njikwa Flash modul

Maka modul nwere ebe nchekwa flash, enwere ike ijikwa ozi echekwara na ebe nchekwa.Enwere ike ịchekwa ọnụọgụ calibration na modul ID ma gụọ ya azụ.

⬤Otu ọpịpị iji tinye ọnụọgụ ngbanwe na modul Flash

Maka modul nwere ebe nchekwa ọkụ, mgbe eriri Ethernet kwụsịrị, ndị ọrụ nwere ike ijide bọtịnụ nyocha nke onwe na kabinet iji bulite ọnụọgụ calibration na ebe nchekwa flash nke modul na kaadị nnata.

Ọrụ eserese eserese

The cabinets na-egosipụta nọmba kaadị nnata na ozi ọdụ ụgbọ mmiri Ethernet, na-enye ndị ọrụ ohere ịnweta ebe dị mfe na njikọ topology nke ịnata kaadị.

⬤Ntọlite onyonyo echekwara na kaadị nnata Ihe onyonyo gosipụtara n'oge mmalite, ma ọ bụ gosipụtara mgbe eriri Ethernet kwụsịrị ma ọ bụ enweghị mgbama vidiyo enwere ike ịhazi ya.

⬤ Okpomọkụ na voltaji nlekota oru

Enwere ike nyochaa ọnọdụ okpomọkụ na voltaji nke kaadị nnata na-ejighị ihe ndị ọzọ.

Ihe ngosi LCD nke Cabinet

Igwe LCD ejikọrọ na kabinet nwere ike igosipụta okpomọkụ, voltaji, otu oge na-agba ọsọ na ngụkọta oge ịgba ọsọ nke kaadị nnata

⬤Nchọpụta njehie Bit

Enwere ike nyochaa ogo nkwurịta okwu ọdụ ụgbọ mmiri Ethernet nke kaadị nnata yana ọnụ ọgụgụ nke ngwugwu ezighi ezi nwere ike ịdekọ iji nyere aka dozie nsogbu nkwurịta okwu netwọk.

NovaLCT V5.2.0 ma ọ bụ karịa ka achọrọ.

⬤Nchọpụta ọnọdụ nke akụrụngwa ike abụọ Mgbe ejiri ọkụ abụọ, ha

Enwere ike ịhụ ọkwa ọrụ site na kaadị nnata.

Ihe omume firmware na-agụghachi azụ

Enwere ike ịgụghachi mmemme firmware nke kaadị nnata ma chekwaa ya na kọmputa mpaghara.

Mmelite na ntụkwasị obi

NovaLCT V5.2.0 ma ọ bụ karịa ka achọrọ.

l agụghachi paramita nhazi

Enwere ike ịgụta usoro nhazi nke kaadị nnata ma chekwaa ya na kọmputa mpaghara.

⬤LVDS nnyefe (ngwa ngwa raara onwe ya nye chọrọ) A na-eji nnyefe dị iche iche nke obere voltaji (LVDS) iji belata ọnụọgụ data sitere na bọọdụ hub gaa na modul, mee ka anya nnyefe, wee melite ogo nnyefe mgbaàmà yana ndakọrịta elektrọnik (EMC) .

⬤ Nkwado kaadị abụọ na nlekota ọkwa

N'ime ngwa nwere ihe achọrọ maka ntụkwasị obi dị elu, enwere ike itinye kaadị abụọ na-anata n'otu bọọdụ hub maka nkwado ndabere.Mgbe kaadị nnata nke mbụ dara, kaadị nchekwa ahụ nwere ike ịrụ ọrụ ozugbo iji hụ na ọrụ ngosi anaghị akwụsị akwụsị.

Enwere ike nyochaa ọkwa ọrụ nke kaadị nnata nke mbụ na nkwado ndabere na mpaghara NovaLCT V5.2.0 ma ọ bụ karịa.

⬤Ndabere akaghị aka

Kaadị nnata na kaadị izipu na-etolite akaghị site na njikọ ahịrị izizi na ndabere.Mgbe mmejọ mere n'ebe ahịrị ahịrị, ihuenyo ka nwere ike igosipụta onyonyo nke ọma.

Ọdịdị

⬤ Ndabere abụọ nke paramita nhazi

A na-echekwa parampat nhazi kaadị nnabata na mpaghara ngwa na mpaghara ụlọ ọrụ nke kaadị nnata n'otu oge.Ndị ọrụ na-ejikarị nhazi nhazi na mpaghara ngwa.Ọ bụrụ na ọ dị mkpa, ndị ọrụ nwere ike weghachite paramita nhazi na mpaghara mmepụta ihe na mpaghara ngwa.

Nkwado mmemme abụọ

A na-echekwa nnomi abụọ nke mmemme firmware na mpaghara ngwa nke kaadị nnata na ụlọ ọrụ mmepụta ihe iji zere nsogbu na kaadị nnata nwere ike ịrapagidesi ike n'oge mmelite mmemme.

Foto ngwaahịa niile egosiri n'akwụkwọ a bụ naanị maka ihe atụ.Ngwaahịa dị adị nwere ike ịdị iche.

Ihe ngosi

Ihe ngosi	Agba	Ọnọdụ	Nkọwa
Ihe ngosi na-agba ọsọ	Akwụkwọ ndụ akwụkwọ ndụ	Na-egbuke egbuke otu ugboro kwa 1s	Kaadị nnata na-arụ ọrụ nke ọma.Njikọ eriri Ethernet bụ ihe nkịtị, yana ntinye isi iyi vidiyo dị.
		Na-egbuke egbuke otu ugboro kwa 3s	Njikọ eriri Ethernet adịghị mma.
		Na-egbuke egbuke ugboro 3 kwa 0.5s	Njikọ eriri Ethernet bụ ihe nkịtị, mana enweghị ntinye isi iyi vidiyo dị.
		Na-egbuke egbuke otu ugboro kwa 0.2s	Kaadị nnata ahụ etinyeghị mmemme na mpaghara ngwa ma na-eji mmemme ndabere ugbu a.
		Na-egbuke egbuke ugboro 8 kwa 0.5s	Mgbanwe mgbanwe mgbanwe mere na ọdụ ụgbọ mmiri Ethernet yana nkwado ndabere nke akaghị arụ ọrụ.
Ngosipụta ike	Uhie	Na-adị mgbe niile	Ntinye ike bụ ihe nkịtị.

Akụkụ

The osisi ọkpụrụkpụ bụghị ihe karịrị 2.0 mm, na ngụkọta ọkpụrụkpụ (board ọkpụrụkpụ + ọkpụrụkpụ nke components na n'elu na ala n'akụkụ) abụghị ihe karịrị 8.5 mm.Agbanyere njikọ ala (GND) maka ịgbanye oghere.

Ndigide: ± 0.3 nkeji: mm

Oghere dị n'etiti elu elu nke A5s Plus na bọọdụ hub mgbe njikọ ha dị elu jikọtara ọnụ bụ 5.0 mm.A na-atụ aro ogidi ọla kọpa 5-mm.

Iji mepụta oghere ma ọ bụ trepan na-arị elu, biko kpọtụrụ NovaStar maka eserese nhazi ọkwa dị elu.

Ntụtụ

Otu 32 nke Data RGB Parallel

JH2
	NC	25	26	NC
	Port1_T3+	27	28	Port2_T3+
	Port1_T3-	29	30	Port2_T3-
	NC	31	32	NC
	NC	33	34	NC
Nnwale bọtịnụ	TEST_INPUT_KEY	35	36	STA_LED-	Ihe ngosi na-agba ọsọ (dị ala na-arụ ọrụ)
	GND	37	38	GND
Mgbama ngbanwe ahịrị	A	39	40	DCLK1	Mmepụta elekere mgbanwe 1
Mgbama ngbanwe ahịrị	B	41	42	DCLK2	Mmepụta elekere mgbanwe 2
Mgbama ngbanwe ahịrị	C	43	44	LAT	Mbupute mgbaama latch
Mgbama ngbanwe ahịrị	D	45	46	CTRL	Mgbama njikwa ọkụ
Mgbama ngbanwe ahịrị	E	47	48	OE_RED	Gosipụta mgbama nwee ike
Gosipụta mgbama nwee ike	OE_BLUE	49	50	OE_GREEN	Gosipụta mgbama nwee ike
	GND	51	52	GND
/	G1	53	54	R1	/
/	R2	55	56	B1	/
/	B2	57	58	G2	/
/	G3	59	60	R3	/
/	R4	61	62	B3	/
/	B4	63	64	G4	/
	GND	65	66	GND
/	G5	67	68	R5	/
/	R6	69	70	B5	/
/	B6	71	72	G6	/
/	G7	73	74	R7	/
/	R8	75	76	B7	/
/	B8	77	78	G8	/
	GND	79	80	GND
/	G9	81	82	R9	/
/	R10	83	84	B9	/
/	B10	85	86	G10	/
/	G11	87	88	R11	/
/	R12	89	90	B11	/
/	B12	91	92	G12	/
	GND	93	94	GND
/	G13	95	96	R13	/
/	R14	97	98	B13	/
/	B14	99	100	G14	/
/	G15	101	102	R15	/
/	R16	103	104	B15	/
/	B16	105	106	G16	/
	GND	107	108	GND
	NC	109	110	NC
	NC	111	112	NC
	NC	113	114	NC
	NC	115	116	NC
	GND	117	118	GND
	GND	119	120	GND

Otu 64 nke Oghere Usoro Data

JH2
	NC	25	26	NC
	Port1_T3+	27	28	Port2_T3+
	Port1_T3-	29	30	Port2_T3-
	NC	31	32	NC
	NC	33	34	NC
Nnwale bọtịnụ	TEST_INPUT_KEY	35	36	STA_LED-	Ihe ngosi na-agba ọsọ (dị ala na-arụ ọrụ)
	GND	37	38	GND
Mgbama ngbanwe ahịrị	A	39	40	DCLK1	Mmepụta elekere mgbanwe 1
Mgbama ngbanwe ahịrị	B	41	42	DCLK2	Mmepụta elekere mgbanwe 2
Mgbama ngbanwe ahịrị	C	43	44	LAT	Mbupute mgbaama latch
Mgbama ngbanwe ahịrị	D	45	46	CTRL	Mgbama njikwa ọkụ
Mgbama ngbanwe ahịrị	E	47	48	OE_RED	Gosipụta mgbama nwee ike
Gosipụta mgbama nwee ike	OE_BLUE	49	50	OE_GREEN	Gosipụta mgbama nwee ike
	GND	51	52	GND
/	G1	53	54	R1	/
/	R2	55	56	B1	/
/	B2	57	58	G2	/
/	G3	59	60	R3	/
/	R4	61	62	B3	/
/	B4	63	64	G4	/
	GND	65	66	GND
/	G5	67	68	R5	/
/	R6	69	70	B5	/
/	B6	71	72	G6	/
/	G7	73	74	R7	/
/	R8	75	76	B7	/
/	B8	77	78	G8	/
	GND	79	80	GND
/	G9	81	82	R9	/
/	R10	83	84	B9	/
/	B10	85	86	G10	/
/	G11	87	88	R11	/
/	R12	89	90	B11	/
/	B12	91	92	G12	/
	GND	93	94	GND
/	G13	95	96	R13	/
/	R14	97	98	B13	/
/	B14	99	100	G14	/
/	G15	101	102	R15	/
/	R16	103	104	B15	/
/	B16	105	106	G16	/
	GND	107	108	GND
	NC	109	110	NC
	NC	111	112	NC
	NC	113	114	NC
	NC	115	116	NC
	GND	117	118	GND
	GND	119	120	GND

Ntinye ike akwadoro bụ 5.0 V.

OE_RED, OE_GREEN na OE_BLUE bụ akara ngosi na-enyere aka.Mgbe anaghị achịkwa RGB iche, jiri OE_RED.Mgbe ejiri mgbawa PWM, a na-eji ha dị ka akara GCLK.

N'ime ụdị nke otu 128 nke data serial, Data65-Data128 na-atụgharị n'ime Data1-Data64.

Ntụgharị aka maka ọrụ agbatịkwuru

Ntụ maka arụrụ arụrụ arụ
Ntụtụ	Ntụtụ Flash Modul akwadoro	Ntụtụ Module Smart akwadoro	Nkọwa
RFU4	HUB_SPI_CLK	Echekwara	Mgbama elekere nke serial pin
RFU6	HUB_SPI_CS	Echekwara	CS mgbama nke serial pin
RFU8	HUB_SPI_MOSI	/	Ntinye nchekwa data Flash modul
	/	HUB_UART_TX	Smart modul TX mgbama
RFU10	HUB_SPI_MISO	/	Mbupute nchekwa data Flash modul
	/	HUB_UART_RX	Smart modul RX mgbama
RFU3	HUB_CODE0		Module Flash BUS njikwa pin
RFU5	HUB_CODE1
RFU7	HUB_CODE2
RFU9	HUB_CODE3
RFU18	HUB_CODE4
RFU11	HUB_H164_CSD		74HC164 data mgbaama
RFU13	HUB_H164_CLK
RFU14	POWER_STA1		Mgbama nchọpụta ọkụ abụọ
RFU16	POWER_STA2
RFU15	MS_DATA		Mgbama nkwado ndabere kaadị abụọ
RFU17	MS_ID		mgbama ndabere kaadị abụọ

RFU8 na RFU10 bụ ntụtụ ndọtị multiplex mgbaàmà.Naanị otu ntụtụ sitere na ma ọ bụ ntụtụ Smart Module akwadoro ma ọ bụ ntụtụ Flash Module akwadoro ka enwere ike ịhọrọ n'otu oge.

Nkọwapụta

Mkpebi kachasị	512 × 384 @ 60Hz
Igwe ọkụ eletrik	Ntinye voltaji	DC 3.8 V ruo 5.5 V
	Enyere ugbu a	0.6 A
	Enyere ike oriri	3.0 W
Environment na-arụ ọrụ	Okpomọkụ	-20°C ruo +70°C
Environment na-arụ ọrụ	iru mmiri	10% RH ruo 90% RH, na-abụghị condensing
Ebe nchekwa	Okpomọkụ	-25°C ruo +125°C
Ebe nchekwa	iru mmiri	0% RH ruo 95% RH, na-abụghị condensing
Nkọwapụta anụ ahụ	Akụkụ	70.0 mm × 45.0 mm × 8.0 mm
Nkọwapụta anụ ahụ	Nha ịbụ	16,2 g Mara: Ọ bụ arọ nke otu kaadị nnata naanị.
Ozi mbukota	Nkọwa nkwakọ ngwaahịa	A na-akwakọba kaadị ọ bụla na-anata n'ime mkpọ ọnya.Igbe nke ọ bụla nwere kaadị nnata 80.
Ozi mbukota	Akụkụ igbe nkwakọ ngwaahịa	378.0 mm × 190.0 mm × 120.0 mm